15
PRESSURE WASHER KIT 2465I
Connect the product to power and water supply as described.
• Open the water supply.
• Hold the spray gun with both hands.
• Direct the nozzle of the chosen accessory away from you towards the surface to be
cleaned.
• Unlock the trigger and press it until a constant amount of water flows through the
nozzle to allow air trapped in the hose to escape.
• Release the trigger.
• Turn the “OFF/ON” switch to on.
• Hold the spray gun with both hands. Direct the water jet to the object to be cleaned and
press the trigger.
Release the lever of the trigger gun and the device will switch off again and stop the
water jet. High pressure remains in the system.
!
WARNING! Beware of kickback when pressing the trigger!
Operation with detergent
Detergent can only be added when the device is operated in low pressure mode. Low
pressure mode is activated when you attach the soap black coloured nozzle
!
DANGER
When using detergents, the material data safety sheet issued by the detergent
manufacturer must be adhered to, especially the instructions regarding personal
protective equipment.
Remove the cap of the clean detergent bottle. Gently pull the onboard detergent tank out
of its storage position.
