VXI VT1422A, User Manual

Page: 241 / 529

VT1422A Command Reference 239 Chapter 7
ALGorithm
ALGorithm[:EXPLicit]:ARRay?
ALGorithm[:EXPLicit]:ARRay? ’<
alg_name
>’,’<
array_name
>’
returns the
contents of < array_name > from algorithm < alg_name >. ALG:ARR? can return
contents of global arrays when < alg_name > specifies 'GLOBALS'.
Parameters
Comments
•
An error is generated if < alg_name > or < array_name > is not defined.
•
When this command is sent to an Agilent/HP E1406A command module, the
Definite Length Arbitrary Block response data will always use "Big Endian"
(Motorola) byte ordering for the packed 64-bit float values.
•
Returned Value: Definite length block data of IEEE-754 64-bit float
•
Send with VXIplug&play Function: hpe1422_cmdReal64Arr_Q(...)
ALGorithm[:EXPLicit]:DEFine
ALGorithm[:EXPLicit]:DEFine ’<
alg_name
>’,[<
swap_size
>,] ’<
source_code
>’
is used to define control algorithms and global variables.
Parameters
Comments
•
Use VXIplug&play function: hpe1422_downloadAlg(...). This function loads
an algorithm from a file. The VXI plug&play Soft Front Panel program allows
algorithms to be created and tested on-line, then to be stored as files.
•
The < alg_name > must be one of ALG1, ALG2, ALG3 etc. through ALG32 or
GLOBALS. The parameter is not case sensitive. 'ALG1' and 'alg1' are
equivalent as are 'GLOBALS' and 'globals'.
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
alg_name string ALG1 - ALG32 | GLOBALS none
array_name string valid 'C' variable name none
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
alg_name string ALG1 - ALG32 | GLOBALS none
swap_size numeric (uint16) 0 - Max Available Algorithm Memory words
source_code string or block data
see Comments
PIDA... | PIDB. .. | algorithm source none