VXi Reveal Pro
TM
Office User Guide
PAGE 13
PAIRING THE HEADSET
(continued)
To a Cell Phone
NFC Pairing
1 . Confirm that your cell phone is NFC-capable .
2 . Make sure that NFC is enabled on your cell phone .
3 . Turn the headset on .
4 . Place the NFC zone of your cell phone against the NFC zone
of the headset and hold together while your cell phone
registers the headset .
5 . Follow the prompts on your cell phone until it confirms pairing is successful .
Note:
NFC and One-Touch Pairing are dependent on your cell phone. The size and sensitivity of your
phone’s NFC zone and how to connect the headset may vary between devices.
Manual Pairing
1 . Place the headset into pairing mode:
• Power on the headset and make sure it does not connect to another device .
• Press and hold the MFB for 5 seconds, until the light is flashing red and blue . You will hear the voice
prompt “Discovering .”
• The headset will be visible for pairing to devices for 120 seconds .
2 . Place your cell phone in Bluetooth Search/Scan Mode per the manufacturer’s instructions .
4 . Select “VXi Reveal Pro Office” to pair . (Passcode is “0000” if needed .)
5 . When connected, the headset will give you the voice prompt, “Your headset is connected .”
NFC Zone
VoIPon www.voipon.co.uk [email protected] Tel: (0)330 088 0195 Fax: +44 (0)1245 808299
