VXi Reveal Pro
TM
Office User Guide
PAGE 10
Connect and Configure Desk Phone
There are three options to set up the Reveal Pro Office with your desk phone .
Select the best option for your situation:
• Desk Phone (standard)
• Desk Phone with EHS (sold separately)
• Desk Phone with L50 Lifter (sold separately)
Desk Phone (standard)
Connect the desk phone connection cable to the
back of the base and the other end to the headset
port of the phone . If you do not have a headset
port, you will need to use the handset port .
Check Configuration and Make a Test Call:
1 . Set your desk phone volume to mid-range .
2 . Check that the compatibility switch on the
underside of the base is correct for your phone .
Most phone makes use setting A, but many
Cisco phones will use setting B, and many
Avaya phones setting C .
3 . Open the headset line on your desk phone, or remove the handset from the cradle if you are connected
to the handset port .
4 . While wearing the headset, press the Multi-Function Button on the headset .
5 . |f you do not hear a dial tone (or tones) when pressing dial pad buttons, try the other base compatibility
switch settings until you do .
6 . Dial a test call from the desk phone .
• You can fine-tune the volume using the headset volume buttons .
• If additional microphone gain (speaking volume) is needed, you can adjust this on the underside of
the base . Position 8 gives you maximum gain . Position 1 delivers minimum gain .
SET
CONNECT TO YOUR DESK PHONE
(continued)
VoIPon www.voipon.co.uk [email protected] Tel: (0)330 088 0195 Fax: +44 (0)1245 808299
