VXi Reveal Pro
TM
Office User Guide
PAGE 12
PAIRING THE HEADSET
To the Base
The headset and base that were packaged together are pre-paired at point of manufacture . However, if
you wish to use a new headset, or need to re-pair your headset back to the base, the following applies:
Hot Desking
1 . Turn on the headset .
2 . Place the headset in the docking cradle and press the MFB on the base unit .
3 . Wait for pairing to complete . The headset LED will change to a steady blue flash when connected, and
the base unit MFB will change to a steady blue flash .
Note:
Base unit will automatically re-attempt pairing if the first attempt fails. Leave the headset in the
cradle until pairing is successful.
Classic Pairing
1 . Place the base unit into pairing mode . Press and hold the round Multi-Function Button on the base unit
until it flashes red and blue .
2 . Power on your headset . Then, press and hold the MFB until you hear “Discovering” and the headset LED
is flashing red and blue to show it is in pairing mode .
3 . Wait for pairing to complete . The headset LED will change to a steady blue flash when connected, and
the base MFB will change to a steady blue flash .
Note:
When the headset is away from the base for an extended period (e.g. overnight), return the headset
to the cradle and follow the Hot Desking instructions above.
VoIPon www.voipon.co.uk [email protected] Tel: (0)330 088 0195 Fax: +44 (0)1245 808299
