25
24
.USA FCC Part 15
FCC Notice to Users/Product Statements
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
Users are not permitted to make changes or modify the device in any way. Changes or modifications not approved
by VXI Corporation will void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-
ence in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accor-
dance with the instructions, may cause harmful interference to radio communications. However, there is no guar-
antee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encour-
aged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
The user must place the base at least 8” (20cm) or more from any personnel and must not be co-loaded or operat-
ing in conjunction with any other antenna or transmitter in order to comply with FCC RF exposure requirements.
Canada
IC Notice to Users/Product Statements
Operation is subject to the following two conditions:
(1) This device may not cause interference and (2) This device must accept any interference, including interference
that may cause undesired operation of the device.
The term “IC:” before the certification/registration number only signifies that registration was performed based on
a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply
that industry Canada approved the equipment.
Bluetooth is a trademark owned by Bluetooth SIG Inc., and is used by VXI Corporation under license.
Procedure to test for microphone transmit and audio output (Macintosh)
1. Under the Apple Menu select System Preferences
2. Choose System
3. Select Speech
4. Select Speech Recognition
5. Choose Settings
6. Select VXI USB 7.0
7. Click on Calibrate and follow the onscreen directions*
8. Click Done
9. Quit System Preferences
* To put headset in Talk Time mode see page 17 of this user guide.
Why don't I hear a dial tone (VoIP applications)?
1. Make sure the headset is in Talk Time Mode (page 15).
2. Check your internet connection to the wall.
3. Check for low battery indication (page 11).
4. Make sure your VoIP application is properly activated.
5. Make sure your PC’s audio output setting (speaker) is not muted.
How long do I have to charge the headset before I can use it?
You should charge the headset for 4 consecutive hours before first use. After that,
the headset will continue to charge any time it is mounted in the base.
Can I use a different Bluetooth headset with the BlueParrott B1000-GTX base?
Yes. Read the Compatibility section of this user guide and see page 20 for help.
Can I use the BlueParrott B1000-GTX headset with a Bluetooth cellular phone?
Yes. Read the Compatibility section of this user guide and see page 18-19 for help.
Summary of Contents for BlueParrott TalkPro B1000-GTX
Page 15: ...PN202025B...
