background image

 Part number 20073, Rev 0 

 

TABLE OF CONTENTS 

 

RECEIVING ............................................................................................... 3

 

INSTALLATION INSTRUCTIONS ................................................................ 4

 

FREEZER OPERATION .............................................................................. 6

 

ELECTRONIC TEMPERATURE CONTROL ................................................... 7

 

QUICK TROUBLESHOOTING GUIDE ....................................................... 10

 

MAINTENANCE AND CLEANING ............................................................ 12

 

PRODUCT WARRANTY INFORMATION .................................................. 15

 

 

 

BEFORE  CALLING  THE  MANUFACTURER’S  TECHNICAL  SERVICE, 

please  have  the 

unit’s  model  and  serial  number  ready  as  well  as  the  problem  description.    The 
model and serial number is located on the serial tag which can be found on the 
interior left OR right upper wall of the unit. 

For  convenience,  you  may  want  to  record  the  following  information  here  for  easy 
access in the future. 

Model number: __________________________________ 

Serial number: __________________________________ 

Date of delivery: _________________________________

 

Summary of Contents for SCUCBI-0420

















Reviews: