VWR 390-1335 Page 6 Instruction Manual Download

Page: 6 / 61

Instruction Manual INCU-Line Premium

Page

INCU-Line 250R Premium

, 3 stainless steel wire shelves with set of slides

– 2 pcs each, 1 bottom stainless

steel wire shelf with set of slides (2 pcs), keys to the lock (2 pcs), , Manufacturer test certificate at 37

Ethernet cable. Multilingual instruction manual and Premium Control Software can be downloaded from in-

ternal memory on the USB Stick.

INCU-Line 240CR Premium

, 3 stainless steel wire shelves with set of slides

– 2 pcs each, keys to the lock

(2 pcs), Manufacturer test certificate at 37

C, Ethernet cable. Multilingual instruction manual and Premium

Control Software can be downloaded from internal memory on the USB Stick.

INCU-Line 400CR Premium

, 3 stainless steel wire shelves with set of slides

– 2 pcs each, keys to the lock

(2 pcs), Manufacturer test certificate at 37

C, Ethernet cable. Multilingual instruction manual and Premium

Control Software can be downloaded from internal memory on the USB Stick.

INCU-Line 750CR Premium

, 3 stainless steel reinforced wire shelves with set of slides

– 2 pcs each, keys

to the lock (2 pcs), Manufacturer test certificate at 37

C, Ethernet cable. Multilingual instruction manual and

Premium Control Software can be downloaded from internal memory on the USB Stick.

Description

Quantity

Cat. No.

Additional stainless steel shelf for IL 150 and IL 250 Premium

390-1340

Additional stainless steel shelf for IL 240CR Premium

390-0967

Additional stainless steel shelf for IL 400CR Premium

390-0968

Reinforced stainless steel shelf for IL 240CR Premium

390-1035

Reinforced stainless steel shelf for IL 400CR Premium

390-1036

Reinforced stainless steel shelf for IL 750CR Premium

390-1037

3. BEFORE THE FIRST USE

The surface components of the unit are made of stainless steel, therefore slight discoloration may occur. It is

a result of the technologies used in the production of metal sheet in accordance with the requirements of PN-

EN 10088-2 standard and it is not a defect of the unit.

While carrying the unit, please do not tilt it to one side more than

45° from the upright posi-

tion, as there is a high probability of damaging the compressor. If it is necessary to tilt it to

one

side more than 45°, then after siting, please wait at least 3 hours before connecting the

unit to the mains.

Summary of Contents for 390-1335






























































Search results

Summary of Contents for 390-1335

Reviews:

Related manuals for 390-1335

Brands by name

Popular brands

VWR 390-1335, Instruction Manual

Search results

Summary of Contents for 390-1335

Reviews:

Related manuals for 390-1335

Brands by name

Popular brands