VWR 171-1247 Instruction Manual Download

Page: 45 / 51

VWR

P Water System ver 2, rel 1 30.08.2019

Read and Print the Exported History Data from a PC Computer:

Exported data are encrypted. The files exported can be read as pdf files or printed using VWR

’s

VWR Data Converter. The converter SW is on the USB that comes with the system.



Insert a USB stick to the right side of the control console to export the history data as

shown above.



Insert the USB stick to a computer.



Follow the steps below to read, save or print the data for the first time, then tap the data in

the .dcj file in Data to open it directly.

Copy the VWR Data Converter file to your

computer from the SD card.

Tap the file “

WriteRegistry.exe

” as an

administrator to complete the registration.

Tap the file “

VWR Converter.exe

” to open

it.

ap “

Run

” to open the program.

Note:

If the software cannot run, then

install MSVBCRTAIO_X86 program for 32-

bit operating system. Install

MSVBCRTAIO_X64 program for 64-bit

operating system.

Summary of Contents for 171-1247




















































Search results

Summary of Contents for 171-1247

Reviews:

Related manuals for 171-1247

Brands by name

Popular brands

VWR 171-1247, Instruction Manual

Search results

Summary of Contents for 171-1247

Reviews:

Related manuals for 171-1247

Brands by name

Popular brands