VWR
®
P Water System ver 2, rel 1 30.08.2019
2.4.4.4 Installing the Dispenser Kit (RG0P0U001) and the Wireless Dispenser Upgrade Kit
a) For one dispenser connected via wire and another one dispenser connected using wireless,
need to use the upgrade kit
(
RG0P0U012
) to install the dispenser. The kit comes with a 10
meter link bundle and a power adapter
b) Assemble the dispenser as that described above.
c) Connect the tubing and power adapter as shown in the pictures below. Take the tubing out
from the package, cut three pieces in proper length and insert them to the system and
dispenser base as shown below.
2.4.5 Installing the Water Tubing
2.4.5.1 Connecting the Inlet Feed Tubing
a) Remove the stopper on the pure water inlet on the system. Take the 8 mm PE tubing from the
accessories bag and cut a piece of the tubing at proper length for feed.
b) Insert one end of the 8 mm PE tubing into the water inlet on the system (Mark as
Pure Water
In
). Gently pull the tubing outwards to check if the connection is secure.
c) Connect the other end of the tubing to a feed water tank; ensure the tubing inlet is immersed to
the bottom of the tank.
Pure water in
UP Dispenser 1
connected via wire
UP Dispenser 2
connected via wireless
