VWR
®
P Water System ver 2, rel 1 30.08.2019
4 DISPENSING WATER
Water can be dispensed from the dispenser handle either by pressing the dispense button on the
handle or from the main control console.
4.1 Dispensing Water
Tap recirculation icon on the main console or the dispenser to start recirculation. When the
resistivity reaches 18.2 MΩ.cm, press the dispense icon on the monitor or on the
dispenser to dispense UP water. Press the dispense icon again to stop dispensing.
Note:
Dispensers are interlocked. Only one dispenser can be used at a time. Other dispensers will
display “In Use” on the dispenser.
4.2 Adjusting Dispense Rate
To change the dispense rate, tap the icon or on home screen or dispenser monitor.
4.3 Volumetric Dispensing
Setting up is the same on the dispenser or the
control console.
Tap recirculation icon on the main page to
enter Recirculation mode until the resistivity
reaches 18.2 M
Ω.cm.
Tap the right cylinder icon to increase or the left
cylinder icon to decrease the volume.
You can set the volume between 0.1 and 99.9
liters.
Tap the middle dispensing icon
to start
dispensing.
Volume dispensed is displayed at the
start button position. Volumetric dispensing will
stop automatically after completion.
