13
5. Set
wavelength
Press
to set the wavelength, input the value by the numeric keypad, then press
to confirm.
6. Measurement
samples
Put the sample to be measured in the main light path and put reference in the reference light path; the result
is then displayed on the screen automatically.
7. Print the test results
Press
to print the test results.
Quantitative Mode
1. Enter into Quantitative Mode
Main menu, press
or press
,
to select Quantitative Mode, then press
to confirm.
2. Set
unit
Press
to set concentration unit, press
,
to select and press
to confirm.
3. Set up standard curve or load the stored curves
