VVDN_DT4CP2U_Quick_Start_Guide
Rev. A1
24
CONFIDENTIAL
b.
Copy image into SD card by using scp
# scp u-boot-with-spl-pbl.bin
:
c.
Now Copy this binary into /dev/mmcblk0 partition of SD card
# sudo dd if=u-boot-with-spl-pbl.bin of=/dev/mmcblk0 seek=8 count=1560 bs=512
d.
Reboot the board
Upgrade uImage and t4240mfcs.dtb on SD card
a.
Go to the directory where
“ uImage and t4240mfcs.dtb
” file is present in Linux PC
b.
Mount directory.
#mkdir mount
#mount -t ext2 /dev/mmcblk0p1 mount/
c.
Copy image into SD card by using scp
#scp uImage
root@<board ip>:/home/root/mount/boot/
#scp t4240mfcs.dtb
root@<board ip>:/home/root/mount/boot/
#umount /home/root/mount
d.
Reboot the board (Refer
front
view)
Reboot the Right T4240 Board (Server 1)
Press Reset button, for right t4240 reset release reset button when power led is blinking fast (3-6
seconds).
Reboot the left T4240 Board (Server 2)
Press Reset button, for left t4240 reset release reset button when power led is blinking slow (9-12
seconds).
Button
0-3 sec
3-6 sec (Fast blink
power led)
6-9 sec
9-12 sec (Slow
blink power led)
Reset
No Action
Right T4240 Reset
No Action
left T4240 Reset
Summary of Contents for DT4CP-2U
