VVDN DT4CP-2U, Quick Start Manual

Page: 23 / 24

VVDN_DT4CP2U_Quick_Start_Guide Rev. A1
23
CONFIDENTIAL
=> setenv eth9addr 00:10:F4:3A:BA:AB;setenv eth10addr
00:10:F4:3A:BA:B0;setenv eth11addr 00:10:F4:3A:BA:B1;
=> setenv eth6addr 00:10:F4:3A:BA:B8;setenv eth7addr 00:10:F4:3A:BA:B9;setenv
eth8addr 00:10:F4:3A:BA:AA;
=> setenv eth3addr 00:10:F4:3A:BA:A1;setenv eth4addr 00:10:F4:3A:BA:A0;setenv
eth5addr 00:10:F4:3A:BA:BF;
=> setenv ethaddr 00:11:24:33:44:55;setenv eth1addr 00:10:F4:3A:BA:AB;setenv
eth2addr 00:10:F4:3A:BA:AC;setenv eth15addr 00:10:F4:3A:BA:BC;
=> saveenv
Server 2
=> setenv serverip 192.168.1.251; setenv ipaddr 192.168.1.10; setenv ethaddr
00:11:22:33:44:55;
=> setenv eth12addr 00:10:F3:3A:BA:B2;setenv eth13addr
00:10:F3:3A:BA:B3;setenv eth14addr 00:10:F3:3A:BA:B4;
=> setenv eth9addr 00:10:F3:3A:BA:AB;setenv eth10addr
00:10:F3:3A:BA:B0;setenv eth11addr 00:10:F3:3A:BA:B1;
=> setenv eth6addr 00:10:F3:3A:BA:B8;setenv eth7addr 00:10:F3:3A:BA:B9;setenv
eth8addr 00:10:F3:3A:BA:AA;
=> setenv eth3addr 00:10:F3:3A:BA:A1;setenv eth4addr 00:10:F3:3A:BA:A0;setenv
eth5addr 00:10:F3:3A:BA:BF;
=> setenv ethaddr 00:11:22:33:44:55;setenv eth1addr 00:10:F3:3A:BA:AB;setenv
eth2addr 00:10:F3:3A:BA:AC;setenv eth15addr 00:10:F3:3A:BA:BC;
=> saveenv
13. Run following command to load uImage ,t4240mfcs.dtb and rootfs
# run bootcmd
SD card Image upgrade 4.9

Steps for Ethernet port setting
a. Connect Ethernet cable between server1/server2, where need to upgrade images and
Linux PC
b. Ethernet port setting required at server1/server2 for upgrading the images in SD card,
Catch kernel prompt and run following command
# sudo ifconfig fm1-mac1 192.168.1.10 up
c. Ethernet port setting at Linux PC side
# sudo ifconfig eth0 192.168.1.20 up

Upgrade u-boot on SD card
a. Go to the directory where
“ u-boot-with-spl-pbl.bin ” file is present in Linux PC