VVDN DT4CP-2U, Quick Start Manual

Page: 16 / 24

VVDN_DT4CP2U_Quick_Start_Guide Rev. A1
16
CONFIDENTIAL
4 T4240MFCS
Preparing Board 4.1
The steps to prepare this board for use are
Default Configuration:
CPU: 1866.667 MHz, DDR: 1867 MT/s (In case of 1.8G)
CPU: 1666.667 MHz, DDR: 1867 MT/s (In case of 1.6G)
1. Attach an RS-232 cable between the T4240 MFCS CPU/UART port and host computer.
2. Open a serial console tool on the host computer to communicate with this board.
3.
Configure the host computer’s serial port with the following settings

Data rate : 11520 bps

Number of data bits : 8

Number of stop bits :1

Flow Control : Hardware/none
4. Push the power button on the front side of chassis. The board will boot and show the u-boot
console messages on CPU UART.
Features 4.2
Some key features of the DT4CP2U are:

Freescale QorIQ Processing Platform
a. QorIQ T4240 dual communication processors with 24 (e6500 ) cores per T4240.

Memory Subsystem
a. DDR3 SDRAM
1. 6 DIMM slots; supports 4 GB per DIMM(Total 12GB per server).
2. Support DDR3 1866.667 MT/s data rate.

Storage Subsystem
a. SAS HDD
b. PCIe SSD

PCIe
a. PCIe X8 - connector
1. Configured in X4 mode using SERDES configuration.
2. Can support upto Gen3
b. PCIe X16- connector
1. X4 PCIe-NV Me
2. X4 SRIO(3.125Gbaud)

USB 2.0
a. One USB slot per server.

Ethernet