DETAIL A
DETAIL B
A
B
VUTEC CORPORATION
DRAWN BY
REVISED
DESCRIPTION
DRAWING NO.
SCALE:
REV
11711 W. SAMPLE RD. CORAL SPRINGS, FL 33065
THE INFORMATION
CONTAINED IN THIS
DRAWING IS THE SOLE
PROPERTY OF VUTEC
CORPORATION AND
REPRODUCTION IN PART
OR AS A WHOLE WITHOUT
THE WRITTEN
PERMISSION OF VUTEC
CORPORATION IS
PROHIBITED
ASSEMBLY INSTRUCTIONS
SILVERSTAR PANOFLEXX
SILVERSTAR\FLEX\
ASSEMBLYINSTRUCTIONS
NONE
--
ATTACH BOTH CORNERS
WITH O-RINGS AS
SHOWN BEFORE CUTTING
RETAINING STRAP & ROLLING
OUT SCREEN.
ASSEMBLY INSTRUCTIONS:
1.
SET THE FRAME ON A CLEAN, LEVEL SURFACE. BACK SIDE
UP.
2.
PLACE THE SUPPORT SHIMS PROVIDED INSIDE THE FRAME
AS SHOWN.
3.
ALIGN THE ROLLED SCREEN TO THE FRAME.
4.
USE FOUR OF THE O-RINGS PROVIDED TO SECURE TWO OF
THE CORNERS AS SHOWN
5.
USING SCISSORS OR A RAZOR KNIFE, CUT THE RETAINING
STRAP FROM THE INSIDE OF THE CARDBOARD TUBE. BE
CAREFUL NOT TO DAMAGE THE SCREEN.
6.
UNROLL THE SCREEN AND SECURE THE OTHER CORNERS
WITH THE REMAINING O-RINGS.
7.
ADJUST THE SCREEN UNTIL APPROXIMATELY SQUARE TO
THE FRAME AND CENTERED.
SECURE THE REMAINING CORNERS
AFTER UNROLLING THE SCREEN.
FRAME WITH SUPPORT SHIMS PLACED
FRAME WITH UNROLLED SCREEN
ASSEMBLY STEP 4: PREPARE THE FRAME AND SCREEN FOR LACING
PG - 7
D.TALLMAN
04/05/2019
