LECTRIC2CMDF-INST.doc
01/25/2018
2
MECHANICAL INSTALLATION
The LECTRIC 2-C MDF large screen series weight approximately 300lbs to 550lbs depending on the size
of the screen (200” to 285” diagonal). Carefully determine the lifting and transporting methods for
bringing the screen to the mounting location.
Warning:
The mounting location must be structurally sound, rigid and capable of carrying at
least 4 times the weight of the screen. Safety cable attachment is strongly
recommended for additional security.
As shown in Figure 1, there are five mounting brackets for the screen. Use 1/2 inch or 12mm diameter
threaded rods (not supplied) to hang the screen. The spaces between the brackets are varied according to
the size of the screen; to be sure, take measurements from actual unit.
Note: The two end brackets are tied to the screen roller brackets inside. These two brackets must be
used to install the screen.
Figure 1
Warning:
The
bottom
weight
bar
is
being
secure
by
3
screws
to
the
back
of
the
box
for
shipping
purpose.
Be
sure
to
remove
the
screws
to
free
the
weight
bar
before
use.
