LECTRIC2CMDF-INST.doc
01/25/2018
1
IMPORTANT SAFETY INSTRUCTIONS
Basic safety precautions should always be followed; including the following:
♠
Read and understand all instructions before proceeding with the installation and
operations.
♠
Be certain that the supporting structure is sound and capable of carrying the weight as
required.
♠
Seek qualified electricians to perform electrical requirements.
♠
This permanently connected projection screen must be protected by a fuse or circuit
breaker. Make sure that there is a readily disconnect device incorporated on the building
installation wiring.
♠
Obtain proper lifting mechanism to raise and hold the unit steady for installation.
♠
Plan ahead so the installation can go smoothly and efficiently.
IMPORTANT
WARNINGS
AND
CAUTIONS!
WARNING:
A
WARNING
ALERTS
THE
POSSIBILITY
OF
SERIOUS
INJURY
OR
DEATH
IF
THE
INSTRUCTIONS
ARE
NOT
FOLLOWED.
CAUTION:
A
CAUTION
ALERTS
THE
POSSIBILITY
OF
DAMAGE
OR
DESTRUCTION
OF
EQUIPMENT
IF
THE
INSTRUCTIONS
ARE
NOT
FOLLOWED.
WARNING:
FAILURE
TO
READ,
THOROUGHLY
UNDERSTAND,
AND
FOLLOW
ALL
INSTRUCTIONS
CAN
RESULT
IN
SERIOUS
PERSONAL
INJURY,
DAMAGE
TO
EQUIPMENT,
OR
VOIDING
OF
FACTORY
WARRANTY!
IT
IS
THE
INSTALLER’S
RESPONSIBILITY
TO
MAKE
SURE
ALL
COMPONENTS
ARE
PROPERLY
ASSEMBLED
AND
INSTALLED
USING
THE
INSTRUCTIONS
PROVIDED.
WARNING:
FAILURE
TO
INSTALL
ELECTRICAL
REQUIREMENTS
ACCORDING
TO
NATIONAL/LOCAL
ELECTRICAL
CODES
AND
REGULATIONS
MAY
CAUSE
PREMATURE
FAILURE,
FIRE
HAZARD,
ELECTRICAL
SHOCK,
UNSAFE
PRACTICE
AND
REVOCATION
OF
USE.
DISCLAIMER
Vutec Corporation intends to make this manual accurate and complete. However, Vutec makes no claim that the
information contained herein covers all details, conditions or variations, nor does it provide for every possible
contingency in connection with the installation for use of this product. The information contained in this document
is subject to change without notice. Vutec makes no representation of warranty, expressed or implied, regarding the
information contained herein. Vutec assumes no responsibility for accuracy, completeness or sufficiency of the
information contained in this document.
PRE- INSTALLATION
1)
Carefully cut and remove packing materials.
2)
Carefully unpack and inspect the unit for sign of damages.
3)
Be sure to recheck and measure all pertinent dimensions before installation.
4)
Most basic tools are required for installation.
SAVE THESE INSTRUCTIONS
