VuQube VQ4000, Operating Instructions Manual

Page: 14 / 28

Page 12
BELL EXPRESSVU HD
(May not be available in all areas due to service provider limitations.)
The VuQube will automatically switch between the 82 and 91 satellites for Bell ExpressVu by
using the receiver’s remote control, after the receiver has been properly configured. Follow the
instructions on pages 13-15.
SECTION 6
AUTOMATIC SATELLITE SWITCHING
Dish Network - ExpressVu
DISH 500 FOR DISH NETWORK
The VuQube will automatically switch between the 110 and 119 satellites for Dish Network by
using the receiver’s remote control, after the receiver has been properly configured. Follow the
instructions on pages 13-15.
DISH 1000/1000a FOR DISH NETWORK HDTV
Dish Network HD programming is broadcast from 4 satellites (61,110,119,129). The 61 and 129
satellites broadcast identical programming. The 61 is generally stronger in the eastern U.S. and
the 129 in the western U.S. The map below shows the approximate coverage for each satellite.
Your VuQube antenna can be easily configured to work with two different satellite trios (DISH
1000a: 61,110,119 or DISH 1000: 110,119,129). By choosing the appropriate trio that includes
either the 61 or the 129 satellite based on where you are, you can receive all of your desired
programming. Follow the instructions on pages 13-15.
Note: This map is an
approximation only. Which trio
works best in a given location
may differ from what is indicated
on the map.
SATELLITES 61 AND 129 COVERAGE MAP