Vuly BMX Bike, Owner'S Manual

Page: 21 / 36

21
8.10. INSTALLING TRAINING WHEELS
To Attach the Training Wheels to the Frame
1. Position Training Wheel leg on the rear axle.
2. Then place a spring washer followed by a training wheel securing handle onto the axle.
3. Tighten handle until hand tight.
4. Check training wheel is secure and does not move before use.
NOTE : Do not over-tighten. This will damage the Clamp.
WARNING: Make sure the notched tab of the Training Wheel leg is to the rear of the axle and
in the slot of the frame.