Vuly BMX Bike, Owner'S Manual

Page: 15 / 36

15
WARNING: Keep small parts away from children during assembly.
Do not dispose of the carton and packaging until you complete the assembly of the bicycle. This
can prevent accidental disposal of parts of the bicycle.
NOTE:
All of the directions (right, left, front, rear, etc.) in this manual are as seen by the rider
while seated on the bicycle.
8.2 TOOLS RECOMMENDED
Flat Screwdriver 13mm / 15mm
Spanner
Torque Wrench Phillips Screwdriver 4mm, 5mm, 6mm
Allen Keys
8.3 INSTALLING THE FRONT WHEEL
WARNING:
• Do NOT use axle nuts without serrations to attach the front wheel.
• Ensure the wheel spins freely without contacting brake pads or other parts of the bicycle.
• Failure to obey these steps can allow the front wheel to loosen while riding. This can cause
injury to the rider or others.
NOTE : See Brake Section to loosen and re-attach front brakes (if applicable).
For Bolt-On Systems:
1. If axle nuts (a) and washers (c) are already attached to the front axle, remove and set aside.
2. Set the wheel into the front fork
(b)
.
3. Install wheel retainers (c) making sure the tabs are in the fork tab holes (d) .
4. Install the axle nuts (a) with the serrated surface facing IN.
5. With the wheel in the centre of the fork, tighten both axle nuts securely
(a)
.