Vulcan-Hart ML-126365, Installation & Operation Manual

Page: 8 / 19

VCH & VRT SERIES OVENS F-38055 (11-09)
Page 7
3. Turn On/Off Switch to OFF
position.
EXTENDED SHUTDOWN
Perform the following procedure to shut
down the oven for an extended period of
time.
1.
Perform the SHUTDOWN
procedure .
2.
Unplug the oven .
3.
Thoroughly clean the oven
according to the cleaning
procedures in this manual.
4.
Leave the door(s) slightly open
to allow ventilation and preservation
of the gasket(s).
CLEANING
Always UNPLUG ELECTRICAL
POWER SUPPLY before cleaning.
WARNING:
Avoid splashing water into upper
areas of the oven to prevent damage
to electrical components or
connections.
Never spray the unit with a hose.
Never use harsh chemicals or
abrasive pads to clean the oven.
1. Unplug electrical power supply.
DAILY:
2. Allow oven to go through cool-
down period before cleaning.
3. Remove the Interior Side Racks
4.
Take the Interior Side Racks to a
sink or dishwasher for a thorough
cleaning. Use a mild soap and
water solution to clean these
items.
5.
If necessary, clean the interior of
the oven with a damp cloth.
Wipe dry with a soft dry cloth.
6.
Reassemble oven.
7.
Clean the exterior of the oven
with a clean damp cloth.
For heavy-duty cleaning, use warm
water, a degreaser, and a plastic,
stainless steel, or scotch-brite pad.
Never rub in a circular motion. Always
rub gently in the direction of the steel
grain. Rinse thoroughly and wipe dry
with a soft cloth.
HEAVY-DUTY CLEANING:
STAINLESS STEEL CARE
Stainless Steel contains 70 – 80% iron,
which will rust if not properly maintained.
Stainless Steel also contains 12 – 30%
chromium, which forms an invisible
passive, protective film that shields
against corrosion.
CLEANING:
If the protective film remains intact, the
stainless steel will remain intact.
However, if the film is damaged, the
stainless steel can break down and rust.
To prevent stainless steel break-
down, follow these steps:
PREVENTIVE CARE: