Vulcan-Hart ML-126365, Installation & Operation Manual

Page: 11 / 19

VCH & VRT SERIES OVENS F-38055 (11-09)
Page
10
TROUBLESHOOTING
SYMPTOMS POSSIBLE CAUSES REMEDY
Oven not connected to
power source Connect oven to power
source
ON/OFF switch not
ON Press Power ON/OFF switch
to ON
Check circuit breaker
Check GFCI
Moisture problem Dry moisture problem
Shorted element
Contact Authorized Service
Provider
Pinched/damaged wire
Contact Authorized Service
Provider
Damaged power cord
Contact Authorized Service
Provider
Oven is below 150
⁰
F.
This is normal when unit is
cold. If unit is above 150
⁰
F.,
Contact Authorized Service
Provider.
Defective: connection,
wiring, fan, thermostat Contact Authorized Service
Provider
Oven compartment IS heating
and Blower Motor IS NOT
operating with Power Switch
ON
Defective connection or
wiring to motor Contact Authorized Service
Provider
Defective Cooking
Tem perature
Therm os tat
Set Cooking Thermostat to 250
⁰
F.,
w ait several minutes and check
the rear of the oven f or heating.
Both the Pow er Sw itch and
Cooking Temperature Indicator
Lights w ill be lit. If oven cavity
does not heat, Contact Authorized
Service Provider
Defective Holding
Tem perature
Therm os tat
Turn Holding Temperature knob to
250
⁰
F. and check f or heat at rear
of oven cavity. Both the Pow er
Sw itch and Cooking Temperature
Indicator Lights w ill be lit. If the
oven cavity does not heat, Contact
Authorized Service Provider.
Defective High-Limit
Thermostat or Heating
Element.
Contact Authorized Service
Provider
Incorrect oven temperature
Thermostat(s) require
calibration Contact Authorized Service
Provider
Oven not operating
GFCI or Ground Fault Circuit
Indicator tripped
Indicator Lights are lit but
Cooling Fan(s) are NOT
operating
Oven compartment IS NOT
heating and Blower Motor IS
operating with Power Switch
ON
No power