Vulcan-Hart GR Series, Service Manual

Page: 30 / 56

Program Item Key Sequence
LED Status
Display
8
ON OFF Left Right
• Press and hold 6 to light all display
elements.
all *.*.*.*.*.*.*·*·* *.*.*.*.*.*.*·*·*
• Press 7 to test ignition status input. Turn
valve on/off, and press 7 again to update
display.
2
5, 7
Gas valve on. 5, 7 PILOT ON PILOT ON
Gas valve off or ignition module lock out. 5 7 PILOT OF PILOT OF
Temperature
Ready Level
• Press 6 to view the cooking cycle lock out
temperature (always °F). To edit, enter the
desired lock out temperature (rand 0 to
99°F).
3
all READY 40 F
More Service
Programming
Level
• Press 8 to enter the More Service
Programming. To edit one of the
selections, enter the number desired. To
exit a selection, press V to accept and
return to More Service Programming.
4, 5, 6,
7, 8
MORE SERVICE
• Press 4 to view or edit the Shake Alarm
duration: 0-98 seconds; 99-continuous
alarm until canceled manually.
DT-DUR 05 DURATION
• Press 5 to view or edit the Hold Alarm
duration: 0-98 seconds; 99-continuous
alarm until canceled manually.
HD-DUR. ·05 DURATION
• Press 6 to view of edit the Cooking cycle
cancel delay; 0-10 seconds.
4
CANCEL. ·01 DELAY
• Press 7 to view or edit the number of
basket lifts.
all LIFTS 0 , 1, or 2
Press Toggle key to select the number of
basket lifts.
0 = none; 1 = one lift; 2 = two lifts.
5 6
• Press 8 to view or edit the fryer's Energy
Source, electric or gas heat.
all FRYER
ELECTRIC or
gAS
Press Toggle key to select the fryer's
Energy Source, electric or gas heat.
6 7
GR Series Gas Fryers with NCC Controls (formerly Tridelta / Built after 3/05) - SERVICE PROCEDURES AND
ADJUSTMENTS
F35660
Rev. A (0717)
Page 30 of
56