Vulcan Concept VG18601, Instruction Manual

Page: 9 / 40

9
This instruction manual is protected by copyright. Copying it without the written consent of PROFIX Co. Ltd. is prohibited.
«Wear protective
gloves»
«Worn devices cannot
be disposed of with
household waste»
«EC compliant device»
The policy of the PROFIX company consists in permanent improvements of the offered products and therefore the company
reserves the right to make amendments to the product specification without a prior notice. The images included into the
operation manual are only of the exemplary nature and may slightly differ from actual appearance of the device purchased.
E C DECLARATION OF CONFORMITY
MANUFACTURER:
PROFIX Co. Ltd. , 34 Marywilska Street , 03-228 Warsaw Poland
Person who was authorized to develop technical documentation:
, Trade and Distribution Centre PROFIX, 3, Dobra St., Ł omna Las, 05-152 Czosnów
This is to confirm that the following products:
; PROFIX code : type:
230 V; 50 Hz; 600 W; kl. I; no = 2950/min; 180 mm
meet essential requirement included into the following Directives of the European Parliament and the Council:
2006/42/EC of 17 May 2006 on machinery, and amending Directive 95/16/EC (Official Journal of the EU L 157 of 9 June 2006, p. 24, as amended);
200
4 / 108 /EC of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing
Directive 89/336/EEC (Official Journal of the EU L 390 of 31 December 2004, p. 24 -37 as amended) ;
2011/65/EU ( 174 , p. 88—110);
and have been manufactured in accordance with the standards:
EN 60745-1:2009
EN 55014-1:2006+A1:2009 EN 55014-2:1997+A1:2001+A2:2008 EN 61000-3-2:2006+A2:2009 EN 61000-3-3:2008
IEC 62321:2008
Mariusz Rotuski
Mariusz Rotuski
Glaze cutter by VULCAN Concept VG18601 TC180C-1
Official Journal of the EU L of 1 July 2011
ø
Ł omna Las , 14.12.2012 L . dz . : DT-C2/d_zg/0025/01/12.2012
This declaration of conformity is issued under the sole responsibility of thme a n u f acturer;