VTUVIA SN100, Manual, Page: 30 / 48

- 26 -
Battery Charging
Charging Procedure
Follow these steps for charging your bike:
1. Turn the battery pack off using the key switch.
2 .With the battery on or off the bike, place the charger in a flat, secure place, and connect the DC output
plug from the charger (round barrel connector) to the charging port on the side of the battery pack.
3. Then connect the input plug (110/220-volt plug) to the power outlet, charging should initiate and will be
indicated by the LCD charge status light on the charger turning red.
4. After charging, indicated by the charging indicator light turning green, unplug the charger from the wall
outlet first and proceed to remove the charger output plug from the bike charging port.
Always charge your battery in temperatures between 10 and 26 degrees Celsius and ensure the
battery and charger are not damaged before initiating charge. If you notice anything unusual while
charging, please discontinue chargingand use of the bike and contact VTUVIA Bike for help.
Basic Battery Charging Tips
The battery should be recharged after each use. There is no memory effect so you can charge the battery
after short rides without damage.
o The battery can be recharged on or off the bike.
o Remove the battery by turning the key and then pulling the battery forward and up until the battery lifts
off of the mating receptacle.