VTUVIA SN100, Manual, Page: 25 / 48

- 21 -
Operation
Start-Up Procedure
After the bike has been properly assembled following the unboxing video and all components are secured
correctly, you may now proceed to start up the vehicle and select the power level following the next steps.
1. Press “M” to turn on the display.
2. Select your desired level of pedal assistance between level 0 through 5 using the up and down arrows
on the display remote. Level 1 corresponds to the lowest level of pedal assistance, and level 5
corresponds to the highest level of pedal assistance. Level 0 indicates pedal assistance will be inactive.
3. To turn on the headlight once the LCD display are on, long press “+” to turn on the headlight.
4. With the proper safety gear and rider knowledge and understanding you may now proceed to operate
your VTUVIA Bike. You can begin by pedaling the bike in the appropriate drive train gear with or without
pedal assistance. You may also use the throttle to accelerate and maintain your desired speed.
Driving Range
The range of your VTUVIA Bike is the distance the bike will travel on a single full charge of the onboard
battery pack.The range values in this manual are estimates based on expected usage characteristics.
Some of the factors which effect range include changes in elevation, speed, payload, and acceleration,
number of starts and stops and ambient air temperatures. Tire pressure and terrain are also important
variables to consider.