VTUVIA SN100, Manual

Page: 22 / 48

- 18 -
4.MENU Parameter Setting
When power on, press Mode Button twice (<0.3 seconds between presses), the system
enters the parameter setting state. In this state, the meter parameters can be set. Press
Mode Button twice again to exit the setting state. (<0.3 seconds between presses).
When in setting state, press Mode Button to select the desired adjustment item, when the
parameter flashes, press Plus Button and Minus Button to adjust the parameter setting,
press Power Button to save and switch, and press Mode Button twice to exit the setting
state (<0.3 seconds between presses).
* In the parameter setting state, if no key operation is performed for 30 seconds, the meter
automatically exits the setting state. In the riding state (the speed indication is not 0), you
cannot enter the setting interface. If you start cycling in the setting interface (the speed
indicator is not 0), you will automatically exit the setting.
4.1 The display setting items are as follows
Backlight Brightness Automatic shutdown time
Universal/England
Manual/Automatic Switch Password Input