VTS Medical Systems VOLCANO VR Mini, Technical Documentation Manual

Page: 15 / 21

35
164 145
5. AUTOMATICS
5.1 ELEMENTS OF AUTOMATICS
Electric connections may only be made by well-trained electricians, and according to:
Occupational health and safety regulations
Assembly instructions
Technical documentation for each of the automatic elements
NOTE Before starting the assembly process and connecting the system, familiarize yourself with the original documentation attached to the automatic devices.
MODEL SCHEMAT DANE TECHNICZNE UWAGI
AR
W
3
,0
/2
*
(V
o
lc
a
n
o
V
R M
in
i,
V
R1,
V
R2,
V
R3,
V
R
-D)
V
T
S
: 1
-4
-0
1
0
1
-0434
90 91
SPEED CONTROLLER
– ARW 3,0/2
● Power supply voltage: 230V AC +/- 10%
● Allowable current output: 3 A
● Control mode: step control
● Number of control levels: 5
● Type of protection: IP54
● Assembly methods: On a wall
● Work environment parameters 0…35°C
● Do not connect more than one VOLCANO VR 1/VR 2/VR 3/VR-D
device to one rotation controller and more than four
VOLCANO VR Mini devices due to the values of permissible
output currents.
● Minimal distance between particular fans installed – both vertical
and horizontal
– 20 cm.
● We recommend the execution of power supply connection with a
min. 3 x 1.5mm 2 wire
● Automation element drawings present the visualizations of model
products only..
AR
W
0
.6
V
T
S
: 1
-4
-0
1
0
1
-0167
SPEED CONTROLLER - ARW 0.6
● Power supply voltage: 230V AV +/-10%
● Allowable current output: 0,6A
● Control mode: manual
● Number of control levels: 3
● Work environment parameters: 35°C
● Type of protection: IP54
● Do not connect more than one VOLCANO VR Mini device to
one controller
● Minimal distance between particular fans installed
– both vertical and horizontal – 20cm.
● We recommend the execution of power supply connection
with a min. 3 x 1.5mm 2 wire.
● Automation element drawings present the visualizations
of model products only.
T
W
O
-W
AY
V
AL
V
E
W
IT
H V
R AC
T
UA
T
OR V
R
V
T
S
: 1
-2
-1
2
0
4
-2019
TWO-WAY VALVE
● Connection diameter: 3/4”
● Operation mode: on/off
● Maximum differential pressure 90 kPa
● Airflow degree factor kvs: 4.5 m
3
/h
● Work environment paramet ers: 0-60°C
VALVE ACTUATOR
● Power consumption1 W
● Power supply voltage: 230 V AC +/- 10%
● Closing/opening time 3/3 min
● Item without supply: closed
● Type of protection: IP54
● Work environment parameters: 0-60°
● Two-way valve should be installed on the return (outlet) pipeline.
● Automation element drawings are only a visualisation of sample
products.
● Power connection should be done with a cable min. 2 x 0.75 mm
2
.
● Automation element drawings are only a visualisation of sample
products.
Co
n
tr
o
ll
e
r
HM
I
V
OL
CA
NO
EC
V
T
S
:
1
-4
-2801
-0
1
5
7
HMI VOLCANO EC
● Device operation: Touch buttons
● Power supply: 230 V AC
● Maximum output current for valve or valves with actuator:
3(1)A
● Temperature measurement: -10 °C ... +99 °C ; NTC10K
● Outputs:
- 1 analog output 0-10V (8 bit, Imax = 20 mA)
- 2 relays outputs (250 VAC, AC1 500 VA dla 230 VAC)
● Communication: Modbus RTU
● Parameters of working environment: temperature:
0 -
60 °C, humidity: 10 - 90%, without condensation
● Display: blue backlight
● Dimensions: 86 mm x 86 mm x 17 mm
● Protection level: IP20
● used for control all types of VOLCANO EC units
● touch control panel
● the main on / off switch (ON / OFF)
● stepless adjustable fan speed of the EC motor
● built-in thermostat with possibility weekly programing
● continuous mode
● function of heating, cooling and ventilation
● possibility of using external temperature sensor
● RS 485 with ModbusRTU
● Suggested cross sections of electrical cables:
- L, N : 2x1
mm²
- H, C : 2x1
mm²
-
AO, GND : 2x0,5 mm² LIYCY
-
TS; TS : 2x0,5 mm² LIYCY
-
RS 485 : 2x0,75 mm² LIYCY
EN