VOLCANO
VR Mini
VOLCANO
VR Mini 3
VOLCANO
VR1
VOLCANO
VR2
VOLCANO
VR3
VOLCANO
VR4
VOLCANO
VR-D Mini
VOLCANO
VR-D
24
2.3 DEVICE STRUCTURE (VOLCANO)
1.
HEAT EXCHANGER;
2.
AXIAL FAN;
3.
COVER;
4.
AIR GUIDES;
5.
SAMPLE CONSOLE
1.
EN: HEAT EXCHANGER:
maximum parameters of a
heating medium for a heat exchanger are: 130°C, 1,6MPa. Aluminium and copper construction using copper tubes, coil pipe and
aluminium lamellas. Connecting ferrules (male thread ¾”) are on the back panel of the unit. Our series of types includes a single-row heat exchanger in VOLCANO VR1 and two-row heat
exchanger in VOLCANO VR Mini/VR2 and in VOLCANO VR3/VR Mini 3 three-row heat exchanger and four-row heat exchanger in VOLCANO VR4. The glycol concentration in the heating
medium can be up to 50%.
2.
AXIAL FLOW FAN:
maximum working temperature is 60°C, nominal power supply voltage is 230V/50Hz. AC Engine protection is IP54, insulation class F for EC motors IP is 54. Air feed is
performed by the axial
flow fan, which is secured with a protective grate. Adequate blade profile and proper bearings guarantee silent and unfailing operation of the device. High engine power
allows for achieving high efficiency at low power consumption rates, maintaining full air feed regulation. Properly profiled housing lowers the noise emission levels, which makes the device
particularly user-friendly, suitable for buildings with higher acoustic requirements.
3.
HOUSING:
consists of the body and the front panel, made of high quality plastic guaranteeing compatibility with devices powered by
heating medium with temperature parameter up to 130°C
(for VOLCANO VR4 up to 100 °C!!). Volcano VR-D and Volcano VR-D Mini operates circulation air, improving its distribution and performing the de-stratification function.
4.
AIR GUIDES:
allow the hot air stream to be directed in 4 directions. Optimum air stream range and direction are achieved through the special fan blade profile.
5.
ASSEMBLY CONSOLE:
an element of additional equipment - its ergonomic, light structure allows for rotating the device on the horizontal plane for -
60°÷0÷60°, to direct the stream of hot air
wherever it is necessary.
2.4 OVERALL DIMENSIONS (VOLCANO VR Mini, VR Mini 3, VR1, VR2, VR3, V4, VR-D Mini, VR-D)
AC
EC
VOLCANO VR Mini, VR-D Mini/Mini 3
Marks
L [mm]
A
530
B
530
C
310
D
381
E
300
F
381
AC
EC
VOLCANO VR1, VR2, VR3, VR4, VR-D
5
2
3
1
3
4
EN
Marks
L [mm]
A
700
B
700
C
355
D
550
E
350
F
550
Summary of Contents for VOLCANO VR Mini
Page 21: ...41...