www.vtechphones.com
GETTING STARTED
Installation
Set Handset Date and Time
If you subscribe to caller ID service, the date and time will be set automatically with the first incoming
call If you do not have caller ID service, you can set the date and time manually:
• Press
PROG,
then press
or
until
DATE/TIME
is displayed Press
SELECT.
• The month is flashing. Press
or
until the screen displays the correct month Press
SELECT
• The day is flashing. Press
or
until the screen displays the correct day
Press
SELECT.
• The hour is flashing. Press
or
until the screen displays the correct hour Press
SELECT.
• The minute is flashing. Press
or
until the screen displays the correct minute Press
SELECT.
•
AM
or
PM
is flashing. Press
or
to choose between
AM
or
PM.
Press
SELECT
Handset Ringer Style/Battery Save
You can select from four different handset ringer styles, or turn the ringer off and extend the
battery life
• With the handset in idle (off)
mode, press
PROG
• Press
or
until the screen displays
RINGER:
and the current setting
• Press
SELECT
The current setting blinks, and you will hear a sample of the ring
• Press
or
to select
RINGER:
, 2, , or OFF
You will hear a sample of each ring tone
• Press
SELECT
• In the event of a
power outage, or if
your phone’s power
cord is unplugged,
the time setting will
be lost
To single telephone
jack (RJ11C)
Telephone line cord
Noise filter
(For xDSL users)
If you subscribe to DSL service:
If you hear noise during conversations and/or your
caller ID features aren’t functioning properly, install a
noise filter to the telephone line between the base unit
and the telephone line jack Contact your DSL provider
to obtain a noise filter.
