www.vtechphones.com
2
Additional Information
ADDITIONAL INFO
Troubleshooting
Problem
Suggestion
Common cure for
electronic equipment
If the unit does not seem to be responding normally, then try putting the handset in its base If it
does not seem to respond, do the following (in the order listed):
1 Disconnect the power to the base
2 Disconnect the handset battery, and spare battery, if applicable
3 Wait a few minutes
4 Connect power to the base
5 Re-install the battery(ies)
6 Wait for the handset to re-establish its link with the base To be safe, allow up to one minute
for this to take place
To single telephone
jack (RJ11C)
Telephone line cord
Noise filter
(For xDSL users)
If you subscribe to DSL service:
If you hear noise during conversations and/or your caller
ID features aren’t functioning properly, install a noise
filter to the telephone line between the base unit and the
telephone line jack Contact your DSL provider to obtain
a noise filter.
