65
Test device signal strength
You can check the signal strength of
your devices (
SN7014
/
SN7021
/
SN7022
,
all purchased separately), for example,
before mounting it. Follow the instructions
below to check the signal strength
between the device and the telephone
base. For Extension ringer (
SN7014
) and
Audio doorbell (
SN7021
), make sure you
mount them in a location where the signal
strength is good.
Test Extension ringer’s signal
strength
1. Press
MENU
on the cordless handset in
idle mode to enter the main menu.
2. Press
q
or
p
to choose
Set device
and then press
SELECT
.
3. Press
SELECT
to select
Check signal
.
4. Scroll to select
RINGER X
(
X
represents
the device number assigned to the
ringer) and then press
SELECT
.
5. The handset screen displays
Awaiting
signal
. Then, the telephone begins to
test the signal strength.
6. When the handset screen displays
Good signal
, press
SELECT
. The testing
is complete.
• If the handset screen displays
No
signal
, press
SELECT
, and then
repeat from step 4 to test again.
• If the handset screen displays
Weak
signal
, press
SELECT
. Then, move
the Extension ringer closer to the
base, and then adjust the Extension
ringer’s location to improve the
signal. Repeat from step 1 to test
again.
Test Audio doorbell’s signal
strength
1. Press
MENU
on the cordless handset in
idle mode to enter the main menu.
2. Press
q
or
p
to choose
Set device
and then press
SELECT
.
3. Press
SELECT
to select
Check signal
.
4. Scroll to select
DOORBELL X
(
X
represents the device number
assigned to the ringer) and then press
SELECT
.
5. While the handset screen displays
Awaiting signal
, press the chime
button on the front of the Audio
doorbell.
6. When the handset screen displays
Good signal
, press
SELECT
. The testing
is complete.
• If the handset screen displays
No
signal
, press
SELECT
, and then
repeat from step 4 to test again.
• If the handset screen displays
Weak
signal
, press
SELECT
. Then, move
the Extension ringer closer to the
base, and then adjust the Extension
ringer’s location to improve the
signal. Repeat from step 1 to test
again.