EN - 27
En
g
lish
Nickel-metal hydride rechargeable batteries:
Dispose of these batteries in a safe manner.
Do not burn or puncture the battery. Like other
batteries of this type, if burned or punctured,
they could release caustic material which could
cause injury.
The RBRC® seal
The RBRC® seal on the nickel-
metal hydride battery indicates
that VTech Communications, Inc.
is voluntarily participating in an
industry program to collect and
recycle these batteries at the end of their useful
lives, when taken out of service within the
United States and Canada.
The RBRC® program provides a convenient
alternative to placing used nickel-metal hydride
batteries into the trash or municipal waste,
which may be illegal in your area.
VTech’s participation in RBRC® makes it easy
for you to drop off the spent battery at local
retailers participating in the RBRC® program
or at authorized VTech product service centers.
Please call
1 (800) 8 BATTERY™
for information
on Ni-MH battery recycling and disposal bans/
restrictions in your area. VTech’s involvement
in this program is part of its commitment to
protecting our environment and conserving
natural resources.
RBRC® is a registered trademark of
Rechargeable Battery Recycling Corporation.
Appendix
FCC, ACTA and IC regulations
FCC Part 15
This equipment has been tested and found
to comply with the requirements for a Class
B digital device under Part 15 of the Federal
Communications Commission (FCC) rules.
These requirements are intended to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/
TV technician for help.
Changes or modifications to this equipment not
expressly approved by the party responsible
for compliance could void the user’s authority
to operate the equipment.
This device complies with Part 15 of the FCC
rules. Operation is subject to the following
two conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
This Class B digital apparatus complies with
Canadian ICES-003. CAN ICES-3 (B)/NMB-3(B)
