VTech LS1250-B User Manual Download

Page: 46 / 69

7.4 Dial, edit or Delete a Directory

7.4.1 Dial a Directory entry

You can dial a directory entry on any line.

to dial a directory entry:

Search for the desired entry in the directory.
Press / .

7.4.2 edit a Directory entry

Search for the desired entry in the directory.
Press

eDIt

. Edit the name.

Press

p q

– move the cursor to the left or right.

Press

DeLete

BacKSp

– erase a digit.

Press and hold

DeLete

– erase all digits.

Press and hold

paUSe

– enter a dialing pause (a

appears).

3. Press

neXt

. Edit the number.

Press

p q

– move the cursor to the left or right.

Press

DeLete

BacKSp

– erase a character.

Press and hold

DeLete

– erase all characters.

4. Press

SaVe

7.4.3 Delete a Directory entry

to delete an entry:

Search for the desired entry in the directory.
Press

DeLete

Press

yeS

note

Once a directory entry is deleted, it cannot be retrieved.

.
.

•
•
•
•

•
•
•

.
.
3.

Summary of Contents for LS1250-B





































































Search results

Summary of Contents for LS1250-B

Reviews:

Related manuals for LS1250-B

Brands by name

Popular brands

VTech LS1250-B, User Manual

Search results

Summary of Contents for LS1250-B

Reviews:

Related manuals for LS1250-B

Brands by name

Popular brands