12
• Turn the unit OFF before connecting to a computer.
• Pull up the rubber cover of the USB port on your
KidiGo
®
.
• Insert the small end of the USB cable into the USB port on the
KidiGo
®
.
• Insert the larger end of the USB cable into a USB port on the computer.
NOTE: To preserve battery life, you may remove the batteries while
KidiGo
®
is connected to the computer.
A USB port is usually marked with this symbol
.
• Two removable drives called VTech 1483 and VT SYSTEM will appear.
VTech 1483 is for storage of your data, VT SYSTEM is for storage of
system data and cannot be accessed. If there is a memory card in the
unit, the removable drive will show the content on the memory card
only. To transfer files to the internal memory, please eject the memory
card and then connect the unit to the computer again.
To avoid any potential damage to your KidiGo
®
• When the USB cable is not connected to the unit, ensure the USB
rubber cover is fully covering the USB port of the unit.
• Please ensure the microSD card slot rubber cover of the unit is fitted
in place.
NOTE: Once KidiGo
®
is connected to your computer, do not insert or
remove the memory card and do not disconnect the unit while files are
uploading or downloading. After you have finished, remove the unit by
following the steps to safely remove hardware from your computer. You
can then physically unplug the unit from the computer.
To transfer MP3 files to KidiGo
®
:
• Select the MP3 files you would like to upload from your computer.
• Locate and open the MUSIC folder in the removable drive VTech
1483, drag and drop the files into this folder.
To transfer Photos / Videos to KidiGo
®
:
• Select the photos / Videos you would like to upload from your
computer.
• Locate and open the PHOTO folder in the removable drive VTech
1483, drag and drop photo files into this folder or drag and drop video
files into the VIDEO folder.
Note: Video should be converted to supported format before transferring
to
KidiGo
®
. Please refer to pages 5-6 for details of the video format.
Connecting with VTech Learning Lodge
After you have installed VTech Learning Lodge on your computer, the
software will run automatically each time you connect your
KidiGo
®
to
c
onnecting
to
a
c
omputer
