VTech IP8300, Manual

Page: 13 / 105

www.vtechphones.com 9
Prepare the handset
Handset charger installation
Plug the handset charger power adapter into the power port located at the bottom of the charger
and the other end into the electrical outlet as shown below. Make sure the electrical outlet is not
controlled by a wall switch.
The power adapters for the handset charger and the telephone base are different. The power
adapter for the handset charger is the smaller adapter.
Installation and configuration
Use only the AC
power adapter
supplied with this
telephone.
This power unit
is intended to be
correctly oriented
in a vertical
QTƀQQTOQWPV
position. The
prongs are not
designed to hold
the plug in place
if it is plugged
into a ceiling or
an under-the-
table/cabinet
outlet.
•
•