Advanced
Operations
46
Handset and Base Operation
Transferring Calls
Blind Transfer
From the Handset:
•
Press the joystick
in
then press joystick
or
to the desired destination.
•
Press the joystick
in
again for confirmation.
•
The ringing Handset or Base can pick up the transferred call just like any
incoming call.
From the Base:
•
Press
INTERCOM
or
XFER
softkey. Scroll to the desired destination, then
press
OK
.
•
The ringing Handset can pick up the transferred call just like any incoming call.
Announced Transfer
You can perform an announced transfer (call and advise another extension)
of an active call by doing the following steps:
From the Handset:
•
Press
HOLD
to place your call on hold.
•
Press the joystick in
any direction
then press joystick
to
Intercom,
press
the joystick
in
again
to confirm.
-
OR
-
Press the joystick in
any direction
then press the dialing key
1
.
•
Press joystick
or
to the desired destination.
•
To confirm,
press the joystick
in
again.
•
When the ringing Handset or Base answers, announce that there's an active
call on hold.
•
Press
OFF
(on the Handset) or
INTERCOM
(on the Base).
•
From the Base:
•
Press
HOLD
to place your call on hold.
•
Press
INTERCOM
.
•
Scroll to the desired destination, then press
OK
.
•
When the ringing Handset answers, announce that there's an active call on hold.
•
Press
INTERCOM
(on the Base) or press OFF (on the Handset).
•
Press
ON
(on the destination Handset ) to pick up the call on hold.
i 5886 manualNov11.p65
11/12/2003, 9:51 AM
45
You can transfer calls on the
i
5836
system from the Base to Handset, Handset
to Handset, or Handset to Base.
You can directly transfer any active call to another
i
5836
extension
without notification by doing the following steps:
Press
ON
(on the destination Handset) or
SPEAKERPHONE
(on the
destination Base) to pick up the call on hold.
