15
Registration
Register Additional
i
5801 Handsets
After charging, the screen will display:
Find the
BASE ID Code
by doing the following (Base
must be OFF):
1.
At the Base, press
MENU
.
2.
Scroll down to
DISPLAY BASE-ID
, then press
OK
.
3.
Enter the 15-digit Base ID Code into the Handset. If you make a
mistake, move the joystick to the left (
) to backpace or press the
right softkey
to erase a character.
4.
Press
OK
to complete the registration process.
NOTE:
If the Handset, after charging,
Display Searching for Base...
, press
the
NEW
soft key.
Enter Base ID
will now be displayed. Follow the steps
above.
Wait approximately 15 - 60 seconds. You will hear confirmation beeps from the
Base and Handset. The newly registered Handset will now be assigned the
lowest extension number not previously assigned to a different system Handset
(1 - 6).
If you do not enter the correct digit sequence, you will see
Invalid Base ID!
and
hear an
error
tone. move the joystick to the left (
) to backpace or press
the right softkey
to erase a character, and carefully re-enter the
Base
ID Code
.
NOTE: The 15-digit BASE ID Code may contain numbers and characters,
including 0 through 9 and
**.
Make sure you enter all 15 digits.
Congratulations! You can now enjoy the benefits of your
VTech
Multi-Handset
system.
Getting
Started
i 5886 manualNov11.p65
11/12/2003, 9:50 AM
15
