VTech EzRay Air Portable User Manual Download Page 71

Page: 71 / 103

8. Disposing of the Unit

EzRay Air Portable (Model: VEX-P300) User Manual

LISH

8. Disposing of the Unit

This device is designed to be as safe as possible to use and dispose of to reduce

environmental contamination. Many components of this device are environment-

friendly and can be recycled.

All parts and components that contain hazardous materials must be disposed of by

disposal regulations. (IEC 60601-1 Clause 7.9.2.15)

Part

Material

Recyclable

Waste

Disposal

Site

Hazardous waste;

Needs Separate

Collection

Covers

Plastics

●

Boards

●

Cables and

transformer

Copper

●

Packing

Polystyrene

●

Cardboard

●

Paper

●

X-ray tube

●

Battery

●

Other parts

●

Observe all regulations relevant to the disposal of waste in

your country.

This symbol on the device and accompanying documents means that

used electrical and electronic devices (WEEE) should not be mixed

with general household waste.

For professional users in the European Union:

When discarding electrical and electronic devices (EEE), please

contact your dealer or supplier for further information.

For disposal in countries outside of the European Union:

This symbol is only valid in the European Union (EU). When discarding

this device, please contact your local authorities or dealer and ask for

the correct disposal method.

Summary of Contents for EzRay Air Portable








































































































Search results

Summary of Contents for EzRay Air Portable

Reviews:

Related manuals for EzRay Air Portable

Brands by name

Popular brands

VTech EzRay Air Portable, User Manual

Search results

Summary of Contents for EzRay Air Portable

Reviews:

Related manuals for EzRay Air Portable

Brands by name

Popular brands