Using the WebUI
55
VSP715 Administrator and Provisioning Manual
Signaling Settings
The signalling settings are also available as parameters in the configuration file. See
“"network" Module: Network Settings” on page 108
.
After entering information on this page, click
to save it.
Voice
Click the link for each setting to see the matching configuration file parameter in
Module: Network Settings” on page 108
. Default values and ranges are listed there.
NAT Traversal
The NAT Traversal settings are communicated to the VoIP server so that the VSP715 is
reachable when connected to the Internet behind NAT.
Setting
Description
Enter the lower limit of the Real-time Transport Protocol (RTP)
port range. RTP ports specify the minimum and maximum port
values that the phone will use for RTP packets.
Enter the upper limit of the RTP port range.
Setting
Description
Select to enable NAT traversal and IP masquerading.
Enter the external IP address of your router. This setting
identifies the router's public address to the VoIP server.
Enter the router port number being used for SIP. This
setting identifies the router's port to the VoIP server.
Enter the lower limit of the public RTP port range.
Enter the upper limit of the RTP port range.