Configuration File Parameter Guide
110
VSP715 Administrator and Provisioning Manual
MAC-specific configuration file settings
Setting:
network.ip_dns_cache_clear_timeout
Description:
Sets the interval (in minutes) between removing all caching and
performing a new DNS lookup. Set to 0 to remove all caching and
perform a DNS lookup for every outgoing request and response (TTL=0
emulation).
Values:
0–1440
Default:
60
Setting:
network.nat.masquerading_enable
Description:
Enables or disables IP masquerading.
Values:
0 (disabled), 1 (enabled)
Default:
0
Setting:
network.nat.public_ip_addr
Description:
Sets the public IP address.
Values:
Text string (IPv4)
Default:
0
Setting:
network.nat.public_sip_port
Description:
Sets the public SIP port.
Values:
1–65535
Default:
5060
Setting:
network.nat.public_rtp_port_start
Description:
Sets the public RTP port range start.
Values:
1–65535
Default:
18000
Setting:
network.nat.public_rtp_port_end
Description:
Sets the public RTP port range end.
Values:
1–65535
Default:
19000
Setting:
network.ip.dhcp_enable
Description:
Indicates whether DHCP is enabled.
Values:
0 (disabled), 1 (enabled)
Default:
1
