Configuration File Parameter Guide
213
VSP736 Administrator and Provisioning Manual
softkey Module: Custom Soft Key Settings
The custom soft key settings allow you to select which soft keys can appear on the Idle
screen, the Call Active screen, the Call Held screen, the Live Dial screen and the Transfer
Setup screen. You can also specify the position of each soft key. Softkeys appear on the
VSP736 screen in the same order as the softkey values you enter. Enter soft key values
separated by commas. For more information, see
“Customizing Soft Keys” on page 21
. You
can specify a maximum of 12 soft keys (three levels) for each parameter.
The soft key settings follow the format softkey.[element].
All the soft key settings are included in the general configuration file.
Setting:
softkey.idle
Description:
Specifies the soft keys visible on the idle screen.
Values:
blank, dir, call_log, redial,
message, dnd, cfwd, cfna,
cfwd_all, cfwd_busy,
intercom, retrieve, callback,
grp_pickup, dir_pickup, line,
settings
Default:
line,cfwd,dir,settings
Setting:
softkey.call_active
Description:
Specifies the soft keys visible on the active call screen.
Values:
blank, new, park_call, end,
hold, pri_hold, transfer,
conf, flash,hs_pick,record
Default:
end,hold,transfer,conf,
record,hs_pick
Setting:
softkey.call_held
Description:
Specifies the soft keys visible on the held call screen.
Values:
blank, new, retrieve,
grp_pickup, dir_pickup,
end, resume, transfer, conf,
hs_pick
Default:
end,new,resume,transfer,
conf,hs_pick
Setting:
softkey.live_dial
Description:
Specifies the soft keys visible on the live dial screen.
Values:
blank, dir, call_log, redial,
message, end, dial, input,
cancel, backspc
Default:
cancel,backspc,input,dial,
redial
