VTech CS6324, User Manual

Page: 30 / 47

23
Set your remote access code
You can set your own remote access code
from
00 to 99 .
1. Press MENU when the phone is not in
use.
2. Press
q
or
p
to choose
Answering sys
and then press
SELECT
.
3. Press
q
or
p
to choose Ans sys setup
and then press SELECT .
4. Press
q
or
p
to choose Remote code
and then press SELECT .
5. Press the dialing keys ( 0-9 ) to enter
the code, or q or p to select from 00
to 99 , then press SELECT to save. You
hear a confirmation tone.
Call screening
If the answering system and call screening
are on, the announcement and the
incoming message broadcast at the
telephone base while the call is answered
by the answering system.
Options while a message is being
recorded:
• Press
VOL
or
VOL
to adjust the
listening volume.
• Press to temporarily turn off the call
screening.
• Press or VOL to temporarily turn
on the call screening if it is set to off.
Call intercept
If you want to talk to the person whose
message is being recorded, press
TALK
on the handset.
Record, play or delete memos
Memos are your own recorded messages
used as reminders for yourself or others
using the same answering system. You can
record your own memos using a system
handset. Playback and delete them in the
same way as incoming messages.
1. Press
MENU when the phone is not in
use.
2. Press
q
or
p
to choose
Answering sys
and then press
SELECT
.
3. Press
q
or
p
to choose Record memo
and then press SELECT . The handset
displays Record in 5 sec (counting
down) and then Recording... Stop
[5] and announces, “Record after the
tone. Press 5 when you are done.”
4. Speak towards the handset
microphone. Press 5 or OFF when
you finish recording. The handset
announces “Recorded.”
NOTES NOTE
NOTES
• If you record a memo when the answering
system memory is full, the system
announces, “Memory is full.”
• Each memo can be up to three minutes in
length. Memos shorter than two second are
not recorded.
• When the answering system has less than
three minutes of recording time left, the
handset announces, “Less than three minutes
to record,” and displays Rec mem low .