VTech CS6224, User Manual, Page: 30 / 47

23
Set your remote access code
You can set your own remote access code
from
00
to
99
.
1. Press
MENU
when the phone is not in
use.
2. Press
q
or
p
to choose
Answering
sys
and then press
SELECT
.
3. Press
q
or
p
to choose
Ans sys
setup
and then press
SELECT
.
4. Press
q
or
p
to choose
Remote
code
and then press
SELECT
.
5. Press the dialing keys (
0-9
) to enter the
code, or q or p to select from
00
to
99
, then press
SELECT
to save. You
hear a confirmation tone.
Call screening
If the answering system and call screening
are on, the announcement and the
incoming message broadcast at the
telephone base while the call is answered
by the answering system.
Options while a message is being
recorded:
• Press
/VOLUME
or
/VOLUME
to
adjust the listening volume.
• Press
/STOP
to temporarily turn off
the call screening.
• Press
/PLAY
or
/VOLUME
to
temporarily turn on the call screening if
it is set to off.
Call intercept
If you want to talk to the person whose
message is being recorded, press
on
the handset.
Record, play or delete memos
Memos are your own recorded messages
used as reminders for yourself or others
using the same answering system. You can
record your own memos using a system
handset. Playback and delete them in the
same way as incoming messages.
1. Press
MENU
when the phone is not in
use.
2. Press
q
or
p
to choose
Answering
sys
and then press
SELECT
.
3. Press
q
or
p
to choose
Record
memo
and then press
SELECT
.
The handset displays
Record
in 5 sec
(counting down) and
then
Recording... Stop [5]
and
announces, “
Record after the tone.
Press 5 when you are done.
”
4. Speak towards the handset
microphone. Press
5
or
OFF
when
you finish recording. The handset
announces “
Recorded.
”
NOTES
• If you record a memo when the answering
system memory is full, the system
announces, “
Memory is full.
”
• Each memo can be up to three minutes in
length. Memos shorter than two second are
not recorded.
• When the answering system has less than
three minutes of recording time left, the
handset announces, “
Less than three
minutes to record,
” and displays
Rec mem
low
.