BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back of the
unit. Use a coin or a screwdriver to loosen
the screw.
3. Install 2 new ‘AAA’ (UM4/LR03) batteries
following the diagram inside the battery
box.
4. Replace the battery cover and tighten the
screw to secure.
BATTERY NOTICE
• Install batteries correctly observing the polarity (+, -) signs to avoid
leakage.
• Do not mix old and new batteries.
• Do not mix batteries of different types: alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Remove the batteries from the equipment when the unit will not be used
for an extended period of time.
• Always remove exhausted batteries from the equipment.
• Do not dispose of batteries in fire.
• Do not attempt to recharge ordinary batteries.
• The supply terminals are not to be short-circuited.
• Only batteries of the same and equivalent type as recommended are to
be used.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE BATTERIES.
INCLUDED IN THIS PACKAGE
- One
VTech
®
Bop & Learn Guitar
™
- One instruction manual
User’s Manual
Bop & Learn Guitar
™
1
PRODUCT FEATURES
1. ON/OFF SWITCH
To turn the unit
ON
, slide the
ON/OFF SWITCH
to the
ON
(
) position. To turn the unit
OFF
,
slide the
ON/OFF SWITCH
to the
OFF
(
)
position.
2. AUTOMATIC SHUT-OFF
To preserve the battery life, the
VTech
®
Bop & Learn Guitar™
will
automatically power-down after approximately 30 seconds without input.
The unit can be turned on again by pressing any button.
ACTIVITIES
1. Slide the
on/off switch
to turn the unit on. You
will hear a guitar sound, a song and a short
phrase. The light will flash with the sound.
2. Press the
number buttons
to hear numbers,
colors and insect names identified, as well as
short tunes, sounds and melodies. The light
will flash with the sound.
3. Move the
slider
to hear a variety of phrases,
sounds, melodies and songs. The light will
flash with the sound.
2
