37
USING
y
OU
r
BAB
y
MONITO
r
6.9 Dim Mode
The dim mode is preset to on to help you save the parent unit power.
Whenever the parent unit has been left idle for 10 minutes while the
screen is still on, the screen will be dimmed automatically to save power.
To set the dim mode of the parent unit screen:
Press
when the parent unit is not in use.
Press or to choose
LCD, then press
.
Press or to choose
Dim mode.
Press or to select
On or Off.
6.10 rename
You can rename each baby unit. Once the baby unit is
renamed, its new name together with the baby unit number
will appear under the following sub-menus:
SENTIVITIY
TEMPERATURE
RENAME
Pair/Unpair CAM
Press
when the parent unit is not in use.
Press or to choose
rename, then press
.
Press or to choose the desired baby unit, then press
.
Press or to choose the desired name for the baby unit, then press
to confirm your selection.
6.11 Pair/unpair Baby Unit
6.11.1 Pair New Baby Unit
The baby units and parent unit provided are already paired.
You can add or replace baby units (
BM4510-OWL, purchased
separately) to your baby monitor system.
You can pair a maximum of four baby units to your parent unit.
Each new baby unit must be paired to the parent unit before use.
Make sure you power on the baby unit (see page 27) and the parent unit
(see page 28) before pairing.
1.
2.
3.
4.
•
•
•
•
1.
2.
3.
4.
