29
PA
r
ENT UNIT OPE
r
ATION
5.4 Monitoring mode
Every time you turn on the parent unit, you enter the
SINGLE-CAM mode. The screen displays image of a particular baby
unit in full screen. If there is more than one baby unit in your system,
you can switch between baby units in
SINGLE-CAM mode. You
can also monitor in
SPLIT-VIEW mode, where the screen displays a
maximum of four baby units in one screen, or
PATrOL mode, where
the screen switches between all paired baby units in sequence every 7
seconds.
In SINGLE-CAM mode:
Press
to view image of the next baby unit.
Press
repeatedly to enter
SPLIT-VIEW or PATrOL mode.
In SPLIT-VIEW mode:
Press , , or to select a baby unit.
Press to view images from the selected baby unit temporarily in
SINGLE-CAM mode. It returns to
SPLIT-VIEW mode after 10 seconds.
Press
repeatedly to switch to
SINGLE-CAM or PATrOL mode.
In PATrOL mode:
In
PATrOL mode: The parent unit automatically
switches every 7 seconds in sequence between the paired baby
units.
Press
repeatedly to change to
SINGLE-CAM or SPLIT-VIEW
mode.
Note
The parent unit is muted while in
SPLIT-VIEW or PATrOL mode.
5.5 To Turn the Screen On or Off
Press and hold
on the parent unit at any time.
•
•
•
•
•
•
•
•
