6
2.3 Baby Unit Installation Options
The baby unit is ready for tabletop use. Use the provided wall mount
bracket if you want to mount it on a wall. Make sure to test the reception
and the baby unit position before completing the wall mounting installation
(see
Test your Video and Audio Monitor Before Use on page 26).
2.3.1 Tabletop to Wall Mount Installation
Option 1: Use this method to fix the wall mount bracket securely on the wall.
Note
Check for reception strength and camera angle before drilling the holes.
Place the wall mount bracket on a wall and then use a pencil to mark
the top two holes as shown. Then remove the wall mount bracket and
drill two holes in the wall.
If you drill the holes into a stud, go to step 3.
-Or-
If you drill the holes into an object other than a stud, insert the wall
anchors into the holes and tap gently on the ends with a hammer
until the wall anchors are flush with the wall.
1.
2.
2
1
1
2
3
2
1
1
2
3
