40
41
Appendix
Troubleshooting (continued)
The video and audio monitor produces high-pitched
noise.
The parent unt may be too close to the baby unt or another parent
unt. Make sure the parent unts and the baby unt are at least
1 metre away from one another.
You may be too close to the baby unt or another parent unt when
you press and hold
TALK
. Make sure the parent unts and the baby
unt are at least 1 metre away from one another.
You may have set the senstvty level too hgh. You may need to
You may need to
adjust the senstvty level to a lower level to avod audo feedback
(pages 26 and 27).
My parent unit plays any sounds from the baby unit and
I think it is too noisy.
You may have set the senstvty level to the hghest level (
Level 5
).
If you do so, the baby unt wll transmt any sounds detected to the
parent unts. You may need to adjust the senstvty level to a lower
level (pages 26 and 27).
You may need to adjust the speaker volume on the parent unt
(page 24).
My parent unit beeps.
The baby unt may be out of range. Move the parent unt closer to
the baby unt (but not less than 1 metre).
If the parent unt s powered by the provded battery, t may not
have enough charge for the parent unt to perform normally.
Charge the battery n the parent unt for up to 3 hours.
The temperature of your baby’s room may be too hgh or too low
(pages 32 and 33).
•
•
•
•
•
•
•
•
